KINETURN CENTER DRIVE TURNING MACHINES

Designed for

  • High-speed and high-quality turned shaft production
  • Sawed, sheared, extruded, forged, or headed blanks
  • High hardness turning
  • “Pull” cell or automated system operation

 

KINETURN is a high-speed double-end turning machine in which a part is rotated using a collet design that clamps onto the center of a part to allow simultaneous turning on both ends. KINETURN machines are designed to turn, bore, face, chamfer, groove, drill, and tap both ends of cylindrical blanks or semi-finished parts with high accuracy axial and radial tolerances and low cycle times.

KEY KINETURN BENEFITS

  • Significantly reduced cycle times
  • Superior end-to-end part concentricity
  • Precise axial position repeatability
  • Reduced handling costs
  • Reduced floor space requirements
  • Throughput of two machines in one

KINETURN ADVANCED FEATURES MAXIMIZE TURNING PRODUCTIVITY

  • Quick change collet systems
  • Pneumatic/mechanically actuated collet system
  • Rugged spindle system with heavy-duty drive
  • Electronic variable speed drive or optional servo drive
  • Four-axis linear servo slide system
  • Glass scales on all axes for tool position repeatability (1 micron)
  • Optional Renishaw position sensing system with auto compensate
  • Rugged frame and slides with anti-friction bearing ways and ball screws
  • Up to 3 tool gang tooling with actuated tool holders or optional 8 station turret
  • Quick change or standard tool holders with individual precision adjustment
  • Optional high pressure coolant system with thru tool flow
  • Pendant mounted operator station with GE Fanuc CNC controls (Siemens optional)
  • Optional chip conveyor and centrifugal separation of coolant from chips
center drive turning machine

Look Inside

See it in Action

 

AUTOMATION & SMART MATERIAL HANDLING

  • Robotic systems for auto load/unload
  • Pick & place systems
  • Magazine & hopper storage unit for unattended operation
  • Automatic bar loader
  • On-machine camera systems
  • Fault & diagnostic analysis
  • Remote monitoring & analytics
  • Interactive HMI
center drive turning machine

 TD-11TD-21TD-41TD-61TD-81
Maximum Shaft Diameter (mm)143863.5100152
Minimum Shaft Diameter (mm)462563.563.5
Maximum Length of Shaft (mm)1001000100010001000
Minimum Length of Shaft (mm)157511576250
Minimum Grip Length (mm)157511576250
Spindle Standard (KW)415292937
Maximum Spindle R.P.M.100006500400025001500
Rapid Feed Rate X (mm/sec.)200200200200200
Rapid Feed Rate Z (mm/sec.)200200200200200
CNC ControlsGE Fanuc
Siemens
GE Fanuc
Siemens
GE Fanuc
Siemens
GE Fanuc
Siemens
GE Fanuc
Siemens
*All TD Models are also available as TS versions (double-end vs single-end)