High Speed Coiler Systems

Precision Mechanical Coilers combine special features for improved wire control with a unique high speed feed system.

 

kinecoil 790 high speed coiling machine

The 790 & 7900 High Speed Precision Mechanical Coilers combine special features for improved wire control with a unique high speed feed system to assure superior reliability delivering fast production speeds while holding precise tolerances on diameter, length, and pitch. These High Speed Coilers have served the industrial spring industry with long term reliability for many years.

790 High Speed Coiler

FEATURES & OPTIONS

  • Tungsten carbide feed rolls and wire guides with 4 grooves
  • ¬†Nine pair of feed change gears
  • “Adjustable while running” double pitch full complement of cams
  • Two pair of feed cams – 50 degree and 100 degree dwells
  • Two positive return type cutter cams – low and high rise¬†
  • Five roll two plane wire straightener
  • Wire holdback with carbide roll and wear plates incorporated in preliminary guides
  • High speed electronic counter
  • Adjustable 115 volt work light

SPECIFICATIONS

  • 0.20 – 1.07mm (.008 – .042 in.) wire range
  • 724mm (28.5 in.) max, wire feed
  • 25.4mm (1 in.) max. coil dia.
  • 60-600 springs / minute
  • 584mm x 940mm (23 in. x 37 in.) floor space
  • A/C variable speed drive

7900 High Speed Coiler

FEATURES & OPTIONS

  • Tungsten carbide feed rolls & wire guides with 5 grooves
  • Hardened & ground steel feed roll gears Ten pair of feed change gears.
  • “Adjustable while running” double diameter controls with full complement of cams
  • “Adjustable while running” double pitch full complement of cams
  • Graduations for feed cam adjustments
  • Diameter slide stop
  • Hardened inserts in pitch and diameter levers
  • Seven roll two plane wire straightener
  • Wire holdback with carbide roll and wear plates
  • High speed electronic counter
  • Adjustable 115 volt work light
  • Variable speed drive with 3/4 H.P. motor 230/460 volt, 3 phase, 60 Hz mounted and wired with combination starter, 115 volt circuit transformer and control station

SPECIFICATIONS

  • 0.127mm – 0.533mm (.005 – .021 in.) wire range
  • 444.5mm (17.5 in.) max. wire feed
  • 12.7mm (.5 in.) max. coil diameter
  • 80 – 800 / minute production
  • 610mm x 889mm (24 x 35 in.) floor space
  • A/C variable speed drive